알림
뒤로

PAT-Terminal-1

Powerful assistance for

assembling PAT series test cells in the glove box

Maker

EL-CELL (Germany)

Features

• Potentiostat / Galvanostat / Impedance analyzer 기능을 갖춘 test channel : ±7V, ±100mA, 100µHz to 100kHz

• PAT-Tester-x-8 과 연결하여 사용 가능

• Glove box 내에서 독립형 장치로 작동

• PAT-CELL-FORCE 를 장착하여 정밀한 센서 조정을 하거나 조립 직후의 전기적 신호를 측정

• 전면 디스플레이를 통해 삽입된 test cell 의 전기적 값, 힘, 압력 또는 팽창과 같은 센서 신호 획득

Applications

• Battery

Specifications

General
Voltage range
±7V
Current
±100mA
Cell and electrode
connections
3 electrodes plus sens wires,
Connection matrix
ADC
2 x 24 bit
DAC
1 x 18 bit
Bandwidth ranges (Stability factor)
500kHz (fast)
50kHz (medium)
5kHz (slow)
Acquisition time
(time base)
1ms
Internal
data buffer
100GB
Connections
· D-Sub connector for actively
shielded cell cables, I2C bus
and analog signals

· USB 2.0 connectors

· USB 2 Type C connector for
power supply and connection
to a PAT-Controller-8
Operating
temperature range
20℃ to +40℃
Dimensions (mm)
97 (H) x 164 (L) x 141 (W)
Weight
1.3kg (without inserted test cell)
Voltage
Acquisition of ...
Full cell voltage
Both half cell voltages
Auxiliary voltage
Measurement
accuracy
±0.02% FSR
Control resolution
57µV (18 bit)
Current
Current ranges
±100mA
±10mA
±1mA
±100µA
Auto range
Measurement
noise floor
< 1µA @ 100mA
< 100nA @ 10mA
< 10nA @ 1mA
< 1nA @ 100µA
Measurement
accuracy
±0.05% FSR
Control resolution
1nA min. (18 bit)
Impedance (each channel) 
Frequency range
100µHz to 100kHz
Impedance mode
PEIS and GEIS
(simultaneous measurement of
full-/half-cell impedances)
Impedance range
1mΩ to 100MΩ
Other
Additional
measurement
(each channel)
Digital (I²C) sensor signal,
e.g. for cell temperature

Analog sensor signal,
e.g. for gas pressure
Calibration
Fully automatic self-calibration with internal
voltage reference and
three internal calibration cells
Software
EL-Software with :
· Experiment designer
· Cell and material management
with database
· Script editor
· Live data monitoring
· Analysing and reporting capabilities
Cell identification
PAT-Button with
unique serial number
stored in EEPROM

PAT-Terminal-1


Powerful assistance for assembling PAT series test cells in the glove box

Maker:

EL-CELL (Germany)

FEATURES


• Potentiostat / Galvanostat / Impedance analyzer 기능을 갖춘 test channel : ±7V, ±100mA, 100µHz to 100kHz

• PAT-Tester-x-8 과 연결하여 사용 가능

• Glove box 내에서 독립형 장치로 작동

• PAT-CELL-FORCE 를 장착하여 정밀한 센서 조정을 하거나 조립 직후의 전기적 신호를 측정

• 전면 디스플레이를 통해 삽입된 test cell 의 전기적 값, 힘, 압력 또는 팽창과 같은 센서 신호 획득


APPLICATIONS


• Battery

SPECIFICATIONS


General
Voltage range±7V
Current±100mA
Cell and electrode connections3 electrodes plus sens wires, Connection matrix
ADC2 x 24 bit
DAC1 x 18 bit
Bandwidth ranges (Stability factor)500kHz (fast)
50kHz (medium)
5kHz (slow)
Acquisition time (time base)1ms
Internal data buffer100GB
Connections
  • D-Sub connector for actively shielded cell cables, I2C bus and analog signals
  • USB 2.0 connectors
  • USB 2 Type C connector for power supply and connection to a PAT-Controller-8
Operating temperature range

20℃ to +40℃
Dimensions (mm)97 (H) x 164 (L) x 141 (W)
Weight1.3kg (without inserted test cell)
Voltage
Acquisition of ...Full cell voltage
Both half cell voltages
Auxiliary voltage
Measurement accuracy±0.02% FSR
Control resolution57µV (18 bit)
Current
Current ranges±100mA
±10mA
±1mA
±100µA
Auto range
Measurement noise floor< 1µA @ 100mA
< 100nA @ 10mA
< 10nA @ 1mA
< 1nA @ 100µA
Measurement accuracy±0.05% FSR
Control resolution1nA min. (18 bit)
Impedance (each channel)
Frequency range100µHz to 100kHz
Impedance modePEIS and GEIS (simultaneous measurement of full-/half-cell impedances)
Impedance range1mΩ to 100MΩ
Other
Additional measurement (each channel)Digital (I²C) sensor signal, e.g. for cell temperature
Analog sensor signal, e.g. for gas pressure
CalibrationFully automatic self-calibration with internal voltage reference and three internal calibration cells
Software                                                               EL-Software with :
                                                               Experiment designer
                                                               Cell and material management with database
                                                               Script editor
                                                               Live data monitoring
                                                               Analysing and reporting capabilities
Cell identificationPAT-Button with unique serial number stored in EEPROM