Cables
* BioLogic
▣ BioLogic 사 장비 전용 연결 케이블
▣ 다중전극 응용을 위한 Nstat box : 최대 8 개의 작업전극 동시 테스트 가능
▣ RRDE 응용을 위한 Bipot cable
▣ 최대 150℃ 의 연장케이블
Longer Calbes
| Product | Available length | Cat. No. |
| Premium | ||
SP-200 SP-240 SP-300 VSP-300 BP-300 VMP-300 | 2.5 m | 094-101/3A |
| 3 m | 094-101/3B | |
| 5 m | 094-101/3C | |
| 2.5 m* | 094-101/4-25 | |
| 2.5 m (Ultra Low Current) | 094-101/4A | |
| 5 m (Ultra Low Current) | 094-101/4D | |
| Essential | ||
SP-50e SP-150e VSP VSP-3e VMP-3e | 1.5 m | 092-23/1 |
| 1.5 m stack measurements | 092-23/1S | |
| 1.5 m high temperature (-40°C to +150°C) | 092-23/1HT | |
| 2.5 m | 092-23/2 | |
| 3 m | 092-23/7 | |
| 5 m | 092-23/3 | |
| 10 m | 092-23/4 | |
| Booster 2A, 5A | 2.5 m | 092-33/11 |
| 3 m | 092-33/12 | |
| 5 m | 092-33/13 | |
| Booster 10A, 20A | 2.5 m | 092-33/21 |
| 3 m | 092-33/22 | |
| 5 m | 092-33/23 | |
| BCS series | ||
| Cell cable for BCS-805/810 | 0.3 m | 096-21/1 |
| 2.5 m | 096-21/2 | |
| 5 m | 096-21/3 | |
| Cell cable for BCS-815 | 0.25 m | 096-011/1 |
| 2.5 m | 096-011/2 | |
| 5 m | 096-011/3 | |
| 10 m | 096-011/4 | |
| Booster to Potentiostat | ||
| All boosters | 3 m | 092-33/5 |
| 5 m | 092-33/6 | |
* Without electrometer (compatible with HV-48 & ULC)- requires 094-081/4
Hermetic Cell Cable for Glove Box
| Essential | Premium | ||
| Standard | Low Current cable | ||
| Cat. No. | 092-23/5 | 094-101/6 | 094-101/8 |
| Content | |||
| Feedthrough type | 12 pins | 25 pins * | |
| Inside glovebox (length : 1 m) | Cable with 2 mm connectors on one side and 12-pin Jaeger connector on the other side | Cable with electrometer on one side and 25-pin connector on the other side | |
| Outside glovebox (length : 1.5 m) | Cable with Sub-D 25 connector on one side and 12 pin Jaeger connector on the other side (length 1.5 m) | Cable with Sub-D 25 connector on one side and 12 pin Jaeger connector on the other side (length 1.5 m) | |
| Requirement | |||
| Hole diameter needed in glovebox / mm | 27 | 45 | |
* Two feedthrough seals : one installed in the glove box wall, the other dedicated to the channel board.
Multi-Electrode Investigation Cables
| Description | Compatible instruments | Channel | Length | Cat. No. |
| Bipot cable | SP-150e VSP VSP-3e VMP-3e | 2 | 1.5m | 092-22/12 |
Nstat box (external power supply required) | VSP VSP-3e VMP-3e | 4 | 092-16 | |
| 8 | 092-22/3 | |||
| External power supply for the Nstat box | 092-16/1 | |||
High-Temperature Extension Cables
| Description | Cat. No. | ||
| 092-25/1 | 092-25/2 | ||
| Length | 1.3 m | 2.5 m | |
Temperature * | -40°C to 150°C | ||
| Max. current by using 2 mm input/output/A | 2 | ||
| Max. current by using 4 mm input/output/A | 20 | ||
| Cable diameter / mm | 12.7 | ||
| 2mm | Resistance /mOhm** | < 95 | < 180 |
| Open circuit capacity /pF | < 155 | < 340 | |
| Short circuit inductance /nH | < 20 | < 30 | |
| 4mm | Resistance /mOhm** | < 25 | < 40 |
| Open circuit capacity /pF | < 155 | < 340 | |
| Short circuit inductance /nH | < 195 | < 455 | |
* Only for the cables and output banana plugs. Input receptacles can only be used up to 80°C maximum.
** These resistances will not be measured in a 4-point configuration. The compensation analysis tool can also be used if 2-point measurements are performed. The compensation analysis tool can also be used to compensate the open circuit capacity as well as the short circuit inductanc
Connectors
* BioLogic
▣ 악어클립, 바나나 플러그, Receptacles
| Alligator clips | Cat. No. | ||
| 2 mm (pack of 28) : 8 x red 8 x blue 8 x white 4 x black |  | - Temperature : -25℃ to +100℃ - Rated current : 8A (30V AC - 60V DC) - Contact resistances : 5 mOhm | 092-1001/40 |
| 4 mm (pack of 9) : 3 x red 3 x blue 3 x black |  | - Temperature : -40℃ to +80℃ - Rated current : 32A | 092-1001/41 |
| Receptacles | Cat. No. | ||
| 2 mm (pack of 75) : 20 x red 20 x blue 20 x white 15 x black |  | - Temperature : -60℃ to +100℃ - Rated current : 10A - Contact resistance : < 1 mOhm | 092-1001/42 |
| 4 mm (pack of 36) : 12 x red 12 x blue 12 x black |  | - Temperature : -60℃ to +100℃ - Rated current : 30A - Contact resistance : 0.5 mOhm | 092-1001/43 |
| Banana plugs | Cat. No. | ||
| 2 mm (pack of 40) : 10 x red 10 x blue 10 x white 10 x black |  | - Temperature : -40℃ to +70℃ - Rated current : 10A (30V AC - 60V DC) | 092-1001/44 |
| 4 mm (pack of 24) : 8 x red 8 x blue 8 x white |  | - Temperature : -40℃ to +70℃ - Rated current : 19A (30V AC - 60V DC) | 092-1001/45 |
| Adapters | Cat. No. | ||
| 2 mm receptacle to 4 mm plug adapter (pack of 20) : 6 x red 6 x blue 4 x white 4 x black |  | - Temperature : 0℃ to +60℃ - Rated current : 10A (30V AC - 70V DC) | 092-1001/46 |
| 2 mm receptacle to 4 mm plug adapter for banana plug (pack of 32) : 16 x red 16 x blue |  | - Temperature : -40℃ to +70℃ - Rated current : 25A (30V AC - 60V DC) - Contact resistance : 0.4 mOhm | 092-1001/47 |
| 4 mm receptacle to 2 mm plug adapter for banana plug (pack of 20) |  | - Temperature : -40℃ to +70℃ - Rated current : 10A (30V AC - 60V DC) | 092-1001/48 |
