RPS-HR
High Power Battery Pack Tester :
Up to 1000V, Up to 1000A, Max. 500kW
Maker
BaSyTec (Germany)
Features
• 배터리 팩 테스트 시스템
• 최대 1,000A, 1,000V, 500kW
• BSD 시스템 통합
Applications
• 2nd battery
Specifications
| Power | Up to 500kW (1.5MW in parallel operation) |
| Voltage range | Up to 1000V |
| Voltage accuracy / resolution | 0.02% / 24Bit |
| 4-wire measurement | Yes |
| Current range | Up to 1000A (3000A in parallel operation) |
| Current accuracy / resolution / ripple | 0.05% FS / 24Bit / < 0.3% FS |
| Time resolution | 1µs / < 1ms |
| Current rise time | < 1ms (600V / 800V), < 2ms (other voltages) |
| Parallel operation | Yes, up to 3 channels |
| Current ranges | Optional, up to 2, automatic ranges switching |
| Sampling rate Output change rate | Min. 1ms but not more than 1kHz continually per system |
| Standard inputs | Voltage, current, 4 Pt100/4W |
| Control modes | Current, voltage, power, resistance and combinations |
| Cooling | Air cooled |
| Power supply | 400V / 3 phases, N, GND, power factor > 0.99 |
| Efficiency | Up to 95% |
| Noise | Max. 79dB (A) |
| Isolation monitor | Yes, switchable |
| Battery simulator mode | Optional but with reduced accuracy and resolution and not supported by the BaSyTest software. Control via CAN instead. |
| Emergency stop | Performance level d |
| Other options | CAN interface CMU cell voltage inputs CMU temperature inputs SSMS interface Digital-IO or relay outputs |
| Software | BaSyTest |
| Interface | Ethernet |
RPS-HR
High Power Battery Pack Tester : Up to 1000V, Up to 1000A, Max. 500kW
Maker:
BaSyTec (Germany)
FEATURES
• 배터리 팩 테스트 시스템
• 최대 1,000A, 1,000V, 500kW
• BSD 시스템 통합
APPLICATIONS
• 2nd battery
SPECIFICATIONS
| Power | Up to 500kW (1.5MW in parallel operation) |
| Voltage range | Up to 1000V |
| Voltage accuracy / resolution | 0.02% / 24Bit |
| 4-wire measurement | Yest |
| Current range | Up to 1000A (3000A in parallel operation) |
| Current accuracy / resolution / ripple | 0.05% FS / 24Bit / < 0.3% FS |
| Time resolution | 1µs / < 1ms |
| Current rise time | < 1ms (600V / 800V), < 2ms (other voltages) |
| Parallel operation | Yes, up to 3 channels |
| Current ranges | Optional, up to 2, automatic ranges switching |
| Sampling rate Output change rate | Min. 1ms but not more than 1kHz continually per system |
| Standard inputs | Voltage, current, 4 Pt100/4W |
| Control modes | Current, voltage, power, resistance and combinations |
| Cooling | Air cooled |
| Power supply | 400V / 3 phases, N, GND, power factor > 0.99 |
| Efficiency | Up to 95% |
| Noise | Max. 79dB (A) |
| Isolation monitor | Yes, switchable |
| Battery simulator mode | Optional but with reduced accuracy and resolution and not supported by the BaSyTest software. Control via CAN instead. |
| Emergency stop | Performance level d |
| Other options | CAN interface CMU cell voltage inputs CMU temperature inputs SSMS interface Digital-IO or relay outputs |
| Software | BaSyTest |
| Interface | Ethernet |
