PRCD3100

FEATURES

• 최대 350MPa의 가압범위 및 200MΩ 의 저항 측정 범위 지원

• Two-probe 및 Four-probe 방식을 자유롭게 전환하여 저항 측정 가능

• 자동 테스트 소프트웨어 제공으로 사용자 설정 및 원클릭 테스트

• 압력, 온도, 습도, 두께, 저항, 전도성, 압축 밀도 등을 실시간으로 모니터링 가능하며 데이터를 자동으로 저장 가능

• Pressurization, Single-point pressure relief, Steady-state pressure relief 등 다양한 Powder Test 모드 지원

• 보정된 표준 Thickness block 및 Resistance block 이 포함

SPECIFICATIONS BY MODELS

Model	PRCD1000	PRCD2000	PRCD3000	PRCD1100	PRCD2100	PRCD3100
Test pressure	1T			5T
Test principle	Two probes	Four probes	Two probe & Four probe dual function (software selection function + switch mold)	Two probes	Four probes	Two probe & Four probe dual function (software selection function + switch mold)
Applicable samples	High resistance samples (such as LFP, LCO, NCM, etc.)	Low resistance samples (such as LFP, graphite, conductive agent, etc.)	Anode & Cathode Samples	High resistance samples (such as LFP, LCO, NCM, etc.)	Low resistance samples (such as graphite, conductive agent, etc.)	Anode & Cathode Samples (Resistance Range 1μΩ ~ 200MΩ)
Test Condition Range	1. Die diameter: 13mm 2. Pressure: 70MPa 3. Resistance range: 1μΩ ~ 20MΩ Remarks: National Standard for Graphite Cathode Materials: GB/T 24533-2019, Stress Required 2200lb			1. Die diameter: 16mm 2. Pressure: 200MPa 3. Resistance range: 1μΩ ~	1. Die diameter: 16mm 2. Pressure: 200MPa 3. Resistance range: 1μΩ ~ 200MΩ

Device Parameters
Resistance range	1uΩ ~ 1200MΩ
Resistance accuracy	±0.05%
Resistivity range	10⁻⁶Ω·cm ~ 10⁹Ω·cm
Conductivity range	10⁻⁹S/cm ~ 10⁶S/cm
Pressure range	0 ~ 200MPa
Pressure accuracy	±0.30% F.S
Thickness range	0 ~ 8mm
Thickness resolution / accuracy	0.5μm / ±10μm
Max filling capacity	Φ16mm × 8mm
Temperature and humidity range	20 ~ 90% RH, 0 ~ 50℃
Temperature and humidity accuracy	±5% RH, ±2℃