알림
뒤로

Photo-Electrochemical cell kit

Category

Photo-electrochemical flow H-cell kit

Features


• 광전기화학 flow H-cell kit

• Thin-film photo-anodes 와 cathodes 동시측정

• 각각 electrolyte inlet / outlet 을 갖춘 두 개의 chamber 로 구성되어 있으며, 이온교환막에 의해 분리됨.

• Liquid-tight


Product Type


Product typeCat. No.
Aqueous
B-A-PECF_HC-2x1.5-1
Organic
B-O-PECF_HC-2x1.5-1

Specifications


Nominal exposure area1 cm²
Flow chamber volume2 x 1.5 ml
Recommended substrate size25 x 25 mm
Max. substrate thickness4 mm
Max. membrane thickness4 mm
Cell materials
 PEEK
O-Ring materials

FKM / EPDM (Aqueous)

FFKM (Organic)

Electrode plug diameter
6 mm

Components


• Flow chamber x 2

• Sample holder x 2

• Plug x 4

• Table tripod x 1

• Set of Nylon screws x 1


PTFE Photo-electrochemical flow H-cell kit

Features


• PTFE 광전기화학 flow H-cell kit

• 다음의 용액 사용 시, PEEK 대신 사용

  • Aqua regia - HNO₃ + HCl
  • Benzenesulfonic acid - aqueous C6H5SO3H
  • Bromine (liquid) - pure Br2
  • Carbolic acid (Phenol) - C6H5OH
  • Carbon Disulfide - CS2
  • Chlorine (aqueous and anhydrous liquid) - CI2
  • Chlorosulfonic acid - pure CISO3H
  • Chromic acid - aqueous H2CrO4 > 50%
  • Ethylene bromide (anhydrous) - pure CH2CHBr
  • Fuming sulphuric acid (Oleum) - pure H2SO
  • Hydrobromic acid - aqueous HBr
  • Hydrofluoric acid - concentrated aqueous HF
  • Nitric acid - aqueous HNO3 > 50%
  • Sulphuric acid - concentrated (96%) H2SO4
  • Sulphurous acid - aqueous H2SO3

• Thin-film photo-anodes 와 cathodes 동시측정

• 각각 electrolyte inlet / outlet 을 갖춘 두 개의 chamber 로 구성되어 있으며, 이온교환막에 의해 분리됨.

• Liquid-tight


Product Type


Product typeCat. No.
Aqueous
B-A-PTFE_PECF_HC-2x1.5-1
Organic
B-O-PTFE_PECF_HC-2x1.5-1

Specifications


Nominal exposure area1 cm²
Flow chamber volume2 x 1.5 ml
Recommended substrate size25 x 25 mm
Max. substrate thickness4 mm
Max. membrane thickness4 mm
Cell materials
 PTFE
O-Ring materials

FKM / EPDM (Aqueous)

FFKM (Organic)

Electrode plug diameter
6 mm

Components


• Flow chamber x 2

• Sample holder x 2

• Plug x 4

• Table tripod x 1

• Set of Nylon screws x 1


Photo-electrochemical H-cell kit

Features


• 2-/3-electrode 실험용 광전기화학 H-cell kit

• Thin-film photo-anodes 와 cathodes 동시측정

• 몸통의 magnetic 또는 screw mount 를 사용해 sample 장착

• 각각 electrolyte inlet / outlet 을 갖춘 두 개의 chamber 로 구성되어 있으며, 이온교환막에 의해 분리됨.

• Gas-tight


Product Type


Mount typeAqueousOrganic
MagneticB-A-MM_PEC_HC-2x15-1B-O-MM_PEC_HC-2x15-1
ScrewB-A-PEC_HC-2x15-1
B-O-PEC_HC-2x15-1

Specifications


Nominal exposure area1 cm²
Min. electrolyte volume2 x 10 ml
Max. electrolyte volume2 x 15 ml
Recommended substrate size25 x 25 mm
Max. substrate thickness3 mm
Pt wire CEDia. 0.6 mm, length 250 mm
Cell materials
 PEEK
O-Ring materials

FKM / EPDM (Aqueous)

FFKM (Organic)

Electrode plug diameter
6 mm

Components


• Chamber x 2

• Lid x 2

• Sample mount x 2

• Micro tripod x 1 (magnetic type)

• Pillar x 2 (screw type)

• Plug x 4

• Pt CE x 1

• Ag/AgCl RE x 2 (or non-aqueous Ag/Ag+ RE x 2)





Front contact Photo-electrochemical H-cell kit

Features


• 2-/3-electrode 실험용 이중칸 광전기화학 H-cell kit

• Thin-film photo-anodes 와 cathodes 동시측정

• 각각 electrolyte inlet / outlet 을 갖춘 두 개의 chamber 로 구성되어 있으며, 이온교환막에 의해 분리됨.

• Gas-tight

Product Type


Aperture sizeAqueousOrganic
11.3 mm dia. (1 cm²)B-A-MM_FC_PEC_HC-2x15-1
B-O-MM_FC_PEC_HC-2x15-1
5 mm dia. (0.2 cm²)B-A-MM_FC_PEC_HC-2x15-.2
B-O-MM_FC_PEC_HC-2x15-.2

Specifications


Min. electrolyte volume2 x 10 ml
Max. electrolyte volume2 x 15 ml
Max. substrate thickness3 mm
Pt wire CEDia. 0.6 mm, length 250 mm
Cell materials
 PEEK, Fluoropolymer
O-Ring materials

FKM  (Aqueous)

FFKM (Organic)

Electrode plug diameter
6 mm

Components


• Chamber x 2

• Lid x 2

• Sample mount x 2

• Tantalum contact x 2

• Micro tripod x 1

• Plug x 4

• Set of O-Rings x 1 (18 pcs)

• Pt CE x 1

• Ag/AgCl RE x 2 (or non-aqueous Ag/Ag+ RE x 2)





Front contact Photo-electrochemical single-sided cell kit

Features


• 2-/3-electrode 실험용 단일면 광전기화학 cell kit

• 투명한 유리 또는 플라스틱 foil 위에 증착된 박막 photo-anode 측정

• 샘플 전면에 있는 copper foil 을 통해 photo-anode 전기적 연결 가능

• 응용

  • Basic photo-electrochemistry
  • Photolytic water splitting
  • CO₂ reduction
  • Photo-induced charge separation and photo-corrosion

• Gas-tight

Product Type


Mount type
Aperture sizeAqueousOrganic
Magnetic0.2 cm²B-A-MM_FC_PEC_SS-15-.2
B-O-MM_FC_PEC_SS-15-.2
Hook clamp assembled0.2 cm²
B-A-HCA_FC_PEC_SS-15-.2
B-O-HCA_FC_PEC_SS-15-.2
1.0 cm²
B-A-HCA_FC_PEC_SS-15-1
B-O-HCA_FC_PEC_SS-15-1

Specifications


Nominal exposure area0.2 cm², 1.0 cm²
Min. electrolyte volume10 ml
Max. electrolyte volume15 ml
Min. substrate size7 x 7 mm
Max. substrate width36 mm
Max. substrate thickness4 mm
Pt wire CEDia. 0.6 mm, length 250 mm
Cell materials
 PEEK
O-Ring materials

FKM / EPDM (Aqueous)

FFKM (Organic)

Electrode plug diameter
6 mm

Components


• Chamber x 1

• Lid x 1

• Copper contact x 1

• Sample mount x 1 (or sample mount with hook clamps x 1)

• Tripod x 1

• Plug x 1

• Pt CE x 1

• Ag/AgCl RE x 1 (or non-aqueous Ag/Ag+ RE x 1)





Photo-electrochemical single-sided cell kit

Features


• 2-/3-electrode 실험용 단일면 광전기화학 cell kit

• 투명한 유리 또는 플라스틱 foil 위에 증착된 박막 photo-anode 측정

• 응용

  • Basic photo-electrochemistry
  • Photolytic water splitting
  • Photo-induced charge separation and photo-corrosion

• Gas-tight

Product Type


Mount typeAqueousOrganic
MagneticB-A-MM_PEC_SS-15-1
B-O-MM_PEC_SS-15-1
ScrewB-A-PEC_SS-15-1
B-O-PEC_SS-15-1

Specifications


Nominal exposure area1 cm²
Min. electrolyte volume10 ml
Max. electrolyte volume15 ml
Recommended  substrate size25 x 25 mm
Max. substrate thickness3 mm
Pt wire CEDia. 0.6 mm, length 250 mm
Cell materials
 PEEK
O-Ring materials

FKM / EPDM (Aqueous)

FFKM (Organic)

Electrode plug diameter
6 mm

Components


• Chamber x 1

• Lid x 1

•Sample mount x 1

• Pillar x 1 

• Set of screws (only screw type) x 1

• Plug x 1

• Pt CE x 1

• Ag/AgCl RE x 1 (or non-aqueous Ag/Ag+ RE x 1)





Multiport Photo-electrochemical single-sided cell kit

Features


• 2-/3-electrode 실험용 multiport 단일면 광전기화학 cell kit

• 투명한 유리 또는 플라스틱 foil 위에 증착된 박막 photo-anode 측정

• 측면에 최대 4개까지 별도의 전극 장착 가능 : pH meter, thermometer, Clark electrode, etc.)

• 응용

  • Basic photo-electrochemistry
  • Photolytic water splitting
  • Photo-induced charge separation and photo-corrosion

• Gas-tight

Product Type


Product typeCat. No.
AqueousB-A-MUL_PEC_SS-15-1
OrganicB-O-MUL_PEC_SS-15-1

Specifications


Nominal exposure area1 cm²
Min. electrolyte volume15 ml
Max. electrolyte volume20 ml
Recommended  substrate size25 x 25 mm
Max. substrate thickness3 mm
Pt wire CEDia. 0.6 mm, length 250 mm
Number of electrode slots6
Cell materials
PEEK
O-Ring materials

FKM / EPDM (Aqueous)

FFKM (Organic)

Electrode plug diameter
6 mm

Components


• Chamber x 1

• Lid x 3

• Sample mount x 1

• Pillar x 1

• Set of screws (only screw type) x 1

• Plug x 5

• Pt CE x 1

• Ag/AgCl RE x 1 (or non-aqueous Ag/Ag+ RE x 1)





Photo-electrochemical double-sided cell kit

Features


• 2-/3-electrode 실험용 이중면 광전기화학 cell kit

• 투명한 유리 또는 플라스틱 foil 위에 증착된 박막 photo-anode 측정

• Thin-film photo-anodes 와 cathodes 동시측정

• 응용

  • Basic photo-electrochemistry
  • Photolytic water splitting
  • Photo-induced charge separation and photo-corrosion

• Gas-tight

Product Type


Mount typeAqueousOrganic
MagneticB-A-MM_PEC_DS-15-1
B-O-MM_PEC_DS-15-1
ScrewB-A-PEC_DS-15-1
B-O-PEC_DS-15-1

Specifications


Nominal exposure area1 cm²
Min. electrolyte volume10 ml
Max. electrolyte volume15 ml
Recommended  substrate size25 x 25 mm
Max. substrate thickness3 mm
Pt wire CEDia. 0.6 mm, length 250 mm
Cell materials
 PEEK
O-Ring materials

FKM / EPDM (Aqueous)

FFKM (Organic)

Electrode plug diameter
6 mm

Components


• Chamber x 1

• Lid x 1

• Sample mount x 2

•Pillar x 1

• Set of screws (only screw type) x 2

• Plug x 2

• Pt CE x 1

• Ag/AgCl RE x 1 (or non-aqueous Ag/Ag+ RE x 1)





Photo-electrochemical cell kit, 15 x 15 mm

Features


• 15 x 15 mm² 샘플 2-/3-electrode 실험용 광전기화학 cell kit

•단층 그래핀과 같은 thin-film photo-anodes, 2D 물질 측정

• 응용

  • Basic photo-chemistry
  • Photolytic water splitting
  • Photo-induced charge separation and photo-corrosion

• Gas-tight

Product Type


Mount typeAqueousOrganic
MagneticB-A-MM_PEC_SS-15x15-1
B-O-MM_PEC_SS-15x15-1
ScrewB-A-PEC_SS-15x15-1
B-O-PEC_SS-15x15-1

Specifications


Nominal exposure area1.33 cm²
Min. electrolyte volume10 ml
Max. electrolyte volume15 ml
Substrate size15 x 15 mm
Substrate thickness0.5 mm
Pt wire CEDia. 0.6 mm, length 250 mm
Cell materials
 PEEK
O-Ring materials

FKM / EPDM (Aqueous)

FFKM (Organic)

Electrode plug diameter
6 mm

Components


• Chamber x 1

• Lid x 1

• Sample mount x 1

• WE copper contact x 1

•Pillar x 1

• Set of screws x 1 (screw type)

• Plug x 1

• Pt CE x 1

• Ag/AgCl RE x 1 (or non-aqueous Ag/Ag+ RE x 1)





Photo-electrochemical cell kit, 7 x 7 mm

Features


• 7 x 7 mm² 샘플 2-/3-electrode 실험용 광전기화학 cell kit

•단층 그래핀과 같은 thin-film photo-anodes, 2D 물질 측정

• 응용

  • Basic photo-chemistry
  • Photolytic water splitting
  • Photo-induced charge separation and photo-corrosion

• Gas-tight

Product Type


Mount typeAqueousOrganic
MagneticB-A-MM_PEC_SS-7x7-.2
B-O-MM_PEC_SS-7x7-.2
ScrewB-A-PEC_SS-7x7-.2
B-O-PEC_SS-7x7-.2

Specifications


Nominal exposure area0.2 cm²
Min. electrolyte volume10 ml
Max. electrolyte volume15 ml
Substrate size7 x 7 mm
Substrate thickness0.5 mm
Pt wire CEDia. 0.6 mm, length 250 mm
Cell materials
 PEEK
O-Ring materials

FKM / EPDM (Aqueous)

FFKM (Organic)

Electrode plug diameter
6 mm

Components


• Chamber x 1

• Lid x 1

• Sample mount x 1

• WE copper contact x 1

• Pillar x 1

• Set of screws x 1 (screw type)

• Plug x 1

• Pt CE x 1

• Ag/AgCl RE x 1 (or non-aqueous Ag/Ag+ RE x 1)