Corrosion Cells
* BioLogic
▣ 일반적인 부식 실험에 사용되는 cell kit
▣ 실험 용량, 온도 제어, 기준전극 위치, sample holder 선택
▣ Pitting corrosion test(ASTM G150)에 적합한 Avesta cell kit
※점부식(Pitting corrosion) 실험 시 발생할 수 있는 crevice corrosion을 방지할 수 있습니다.
Standard Corrosion Cells
| Description | Basic corrosion cell kit | Complete corrosion cell kit | Cat. No. |
EL-CORR-1 | EL-CORR-1DJ | ||
| Glass cell 1L | ● | - | EL-C-001 |
| Double-jacketed glass cell 1L | - | ● | EL-C-002 |
| PTFE Cap | ● | ● | EL-C-003 |
| PTFE ring, silicon encapsulated, OD 102mm | ● | ● | EL-C-004 |
| Cell collar with clamp | ● | ● | EL-C-005 |
| Double purge tube | - | ● | EL-C-006 |
| Bridge tube for 6 mm diameter reference electrode, OD 10 mm | ● | ● | EL-C-008 |
| Graphite counter electrode rod (2 ea), OD 6 mm | ● | ● | EL-C-009 |
| Double nut 25 mm and 12 mm diameter | - | ● | EL-C-011 |
| Telescopic cell stand | - | ● | EL-C-012 |
| Purge tube | ● | - | EL-C-016 |
Sample holder 1cm2 (max. sample thickness 3.4 mm, max. diameter 14.6 mm) | - | ● | 092-C-016 |
| Options | |||
| PT100 probe (indicate connector type) | EL-C-014 | ||
| Magnetic stirrer & heater, without PT100 probe | 220V | EL-C-015A | |
| 110V | EL-C-015B | ||
| Bridge tube for 8 mm diameter reference electrode, OD 10 mm | EL-C-017 | ||
| Aluminium base bolder for magnetic stirrer and 1L cell vial | EL-C-018 | ||
| Set of 10 porous frits (4 mm ColarPor™) with PTFE heat shrink (200 mm) | 092-VYC4 | ||
※ The reference electrode has to be purchased separately.
Avesta Cells
| Description | Cat. No. | |
| Avesta cell kit | EL-AVESTA | |
| Components | Double-jacketed cell glass 250 ml | EL-AV-002 |
| PTFE cap 5 holes | EL-AV-003 | |
| O-ring PTFE silicone encapsulated | EL-AV-004 | |
| Cell collar with clamp | EL-A-005 | |
| Double purge tube | EL-AV-006 | |
| Filter paper ring (100 pcs) | EL-AV-007 | |
| Graphite counter electrode rods (2 ea) | EL-C-009 | |
| Bridge tube for 6 mm reference electrode | EL-AV-010 | |
| Double nut | EL-C-011 | |
| Telescopic cell stand | EL-AV-012 | |
| Skeleton | EL-AV-015 | |
| Options | ||
| Peristaltic pump for low flow | EL-AV-008 | |
| Bridge tube for reference electrode with OD of 8 mm | EL-AV-013 | |
| Single purge tube | EL-AV-014 | |
| Temperature probe PT100 | EL-C-014 | |
| Set of 10 porous frit (4 mm CoralPor™) with PTFE heat shrink (200mm) | 092-VYC4 | |
※ The reference electrode has to be purchased separately.
Flat Cell & Galvanic cells
* BioLogic
▣ 평평한 샘플의 부식 실험을 위한 셀
▣ 노출 면적: 1cm2, 10cm2
▣ 양 끝에 각각 다른 물질을 장착할 수 있음 (Galvanic cell)
▣ 샘플 최소 직경: 30.5mm(EL-FLAT-1CM), 40.5mm(EL-FLAT-10CM)
▣ 샘플 최대 두께 : 6mm
▣ PVDF Cell kit : 불산 (Hydrofluoric acid) 과 같은 강한 용액에서 사용
Flat Cells
| Description | Glass kits | PVDF kits | ||
| Flat cell 1cm2 | Flat cell 10cm2 | Flat cell 1cm2 | Flat cell 10cm2 | |
| Cat. No. | ||||
| EL-FLAT-1CM | EL-FLAT-10CM | EL-FLAT-1CM | EL-FLAT-10CM | |
Platinum mesh counter electrode (54 mm wire, 80 mesh, 25 x 35 mm) | A-702439 | |||
| Bridge tube for 6 mm diameter reference electrode | EL-F-004 | - | ||
| Glass cell (250 ml) for flat cell | EL-F-002 | EL-F-PVDF | ||
| Mechanical parts | EL-FLAT-3H | EL-FLAT-4H | EL-FLAT-3H | EL-FLAT-4H |
Options
| Description | Cat. No. |
| Bridge tube for 8 mm diameter reference electrode | EL-F-004B |
| PVDF body (single-jacketed) | EL-F-PVDF |
| EPDM O-rings for 1cm2 with PEEK ferrule for CE | EL-SEAL-1B |
| EPDM O-rings for 10cm2 with PEEK ferrule for CE | EL-SEAL-10B |
| PTFE O-rings for 1cm2 with PEEK ferrule for CE | EL-SEAL-T1B |
| PTFE O-rings for 10cm2 with PEEK ferrule for CE | EL-SEAL-T10B |
| EPDM O-rings for 1cm2 | EL-SEAL-1 |
| EPDM O-rings for 10cm2 | EL-SEAL-10B |
| PTFE O-rings for 1cm2 | EL-SEAL-T1 |
| PTFE O-rings for 10cm2 | EL-SEAL-T10B |
| Set of 10 porous frits (4 mm ColarPor™) with PTFE heat shrink (200mm) | 092-VYC4 |
※ The O-ring kits include 4 O-rings for the glassware side and 10 O-rings for the sample side.
Galvanic Cell kit 1cm2
| EL-GAL-1CM | |
| Contents | Cat. No. |
| Flat Cell kit 1cm2 | EL-FLAT-1CM |
| Galvanic kit 1cm2 | 092-FLAT/1 |
Galvanic Cell kit 10cm2
| EL-GAL-1CM | |
| Contents | Cat. No. |
| Flat Cell kit 1cm2 | EL-FLAT-10CM |
| Galvanic kit 1cm2 | 092-FLAT/10 |
Coating Cells
* BioLogic
▣ 평면 코팅된 샘플 테스트용
▣ 샘플 최대 두께 : 10mm
▣ Vial 용량 : 50ml
▣ 활성영역: 1cm2, 3cm2., 10cm2
▣ 강산 및 강염기에서는 사용 불가
▣ 셀 내부 용액이 50ml 미만일 경우에는 Bridge tube 사용 권장
| Description | Cat. No. | |
| Coating cell kit | EL-COAT | |
| Components | Glass for coating cell (50ml) | EL-P-002 |
| Nylon base with three feet | EL-P-003 | |
| Rubber cup with two holes | EL-P-004 | |
| Metallic clamp | EL-P-005 | |
| O-ring for coating cell | EL-P-006 | |
| Graphite rod counter electrode (OD 6 mm, L 145 mm) | EL-P-009 | |
| Options | ||
| RE-1B Ag/AgCl Reference electrode for aqueous electrolyte | A-012167 | |
| Bridge tube for reference electrode with OD of 8 mm | EL-P-008 | |
| Mask for 1cm2 (20 ea) | EL-P-011 | |
| Mask for 3cm2 (20 ea) | EL-P-012 | |
| Mask for 10cm2 (20 ea) | EL-P-013 | |
Standard
Corrosion Cell
* EC-Frontier
▣ 샘플 표면적: 1cm2
▣ 직경 25mm, 두께 5mm 이내의 샘플 장착 가능
▣ 샘플이 장착된 홀더와 Reference electrode는 Counter electrode, Gas pipe 등이 장착된 셀 뚜껑과 분리가 가능하여 샘플 교체 시 전체 Cap을 다시 분리할 필요가 없습니다.
| Description | Cat. No. |
| Corrosion cell standard kit | VM1-S |
| Components | |
| Cell cap | |
| Glass cell (500 mL, ID: 41.4 mm, H: 62.7 mm) | |
| Sample holder (electrode hole size : 6 mm) | |
| Luggin capillary | |
| Counter electrode | |
| Gas pipe | |
| Thermometer | |
| Clamp | |
| Option | |
| O-ring set | |
* AMEL
▣ 다양한 부식 실험에서 사용할 수 있는 Corrosion cell
Corrosion Cell
| Description | Cat. No. |
| ASTM Corrosion cell, max. sample dia. 18 mm, 1 L, Luggin capillary | 595 |
Flat Sample Cells
| Description | Exposed sample area | Cat. No. |
| Compact flat sample cell for circular flat samples, 35 ml, max. sample dia. 30 mm | 6cm2 | 498 |
| Sturdy flat sample cell for circular flat samples, 2-electrode, 50 ml, max. sample dia. 45 mm | 598 | |
| Cylindrical flat sample cell, 250 ml | 2, 3, 4, 5, 20cm2 | 597 |
| Large volume flat sample cell for disk / flat samples, 500 ml | 2, 4, 20cm2 | 599 |
